Adaptec 2020ZCR Reference Guide - Page 254
enclosure set scsiid
UPC - 760884151136
View all Adaptec 2020ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
enclosure Commands enclosure set scsiid To set the SCSI device ID for a specific device slot on a specific SAFTE enclosure management device, use the enclosure set scsiid command. As discussed in other chapters, a SCSI ID consists of a SCSI channel number (for example, 0, 1, 2, 3, and so on), SCSI device ID (0 through 15 inclusive), and SCSI device logical unit number (0 through 7 inclusive). The enclosure set scsiid command allows you to set the specified device slot to a specific SCSI device ID (the middle number of a SCSI ID). Notes Before setting the SCSI device ID for a specific device slot on a specific SAF-TE enclosure management device, use the controller pause_io command. This command pauses all I/O activity on the currently opened controller. You cannot set the SCSI device ID for a specific device slot to a SCSI device ID that is already in use. The command checks for SCSI device ID conflicts and will display an appropriate error message if you try to assign a SCSI device ID that is already in use. Syntax enclosure set scsiid {enclosure} {slot} {device_id} Parameters {enclosure} Specifies the ID associated with the enclosure management device. The device slot to be assigned a SCSI channel number is located on this enclosure management device. For this version, the controller supports a maximum of eight enclosure management devices on each bus. {slot} Specifies the unit number associated with the device slot that you want to assign a SCSI channel number. This integer can range from 0 to 15 inclusive. {device_id} Specifies the ID (0 through 15 inclusive) of the SCSI device you want to assign to the specified device slot. 9-21