Adaptec 2020ZCR Reference Guide - Page 193
disk show smart
UPC - 760884151136
View all Adaptec 2020ZCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
disk Commands disk show smart To display S.M.A.R.T. configuration information for one or all disks, use the disk show smart command. The acronym S.M.A.R.T. stands for Self-Monitoring, Analysis and Reporting Technology. This technology is an industry standard for hard drives that monitors a variety of disk parameters, such as the rate of read-write errors. In addition, S.M.A.R.T. can send an alert to system administrators about potential problems caused by disk errors. Syntax disk show smart [/all{=boolean}] [/ full{=boolean)] [/ view_changeable{=boolean}][{scsi_device}] Parameters {scsi_device} Specifies the ID for the SCSI disk for which you want to display S.M.A.R.T. configuration information. A SCSI ID consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.), SCSI device ID (0 through 15 inclusive), and SCSI device logical unit number (0 through 7 inclusive). For further details, see scsi_device on page 1-10. You do not need to specify a SCSI ID if you use the /all switch. Switches /all{=boolean} Specifies whether to display S.M.A.R.T. configuration information for all disks on the system. If you specify TRUE for this switch, the command displays S.M.A.R.T. configuration information for all disks on the system. This switch defaults to TRUE. 5-22