Brother International PE-300S Users Manual - English - Page 107
Dle Position Or Re
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
This message will appear when attempting to restore a memory card pattern that has been saved to a different memory card than the one inserted in the machine. This message will appear if you attempt to combine over 36 characters in a single pattern. This message will appear if you press " " key in the utility stitch mode. This message will appear if you attempt to use the foot controller or press "REVERSE STITCH" button during embroidery mode. This message is displayed when the "NEEDLE POSITION" or "REVERSE STITCH" button is pressed while the bobbin winding shaft is pushed to the right. 104 This message will appear if you attempt to select a pattern while you are still in mode. This message is dis- played when the " " key is touched during em- broidering or if the ma- chine is stopped between color changes. This message will appear if you press " " key while the machine is stitching. This message is displayed when a key on the screen is touched while the needle is down. This message is displayed when the embroidery unit is attached while the needle is lowered. Patterns (Memory Card) Patterns (Programmed in Machine) Sewing Chart Error Messages Maintenance Troubleshooting Embroidering Utility Stitches Basic Sewing Machine Operation Setting Up Contents