Brother International PE-300S Users Manual - English - Page 52
Order of one cycle
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Contents Setting Up Basic Sewing Machine Operation 5. Press the "START/STOP" button to start the machine, while gently holding the end of the upper thread. 5 3 * Gently, feed the fabric by hand. * The machine will stop with a reinforcement stitch automati- cally after sewing is completed. * Use a courser stitch density when sewing on heavyweight fabrics and other difficult fabrics. 6. Insert a pin in front of the inside edge of both bar tacks. Insert the seam ripper into center of buttonhole. Cut towards the first 1 pin. Then cut toward the other pin. 1 Pin Utility Stitches Embroidering Maintenance Troubleshooting Error Messages Sewing Chart Order of one cycle 1 2 3 4 5 6 7 8 9 * 1 2 3 4 5 6 7 8 * 1 2 3 4 5 * * Reinforcement stitch 49 Patterns (Programmed in Machine) Patterns (Memory Card)