Brother International PE-300S Users Manual - English - Page 28
Trial Sewing
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Contents Setting Up Basic Sewing Machine Operation Utility Stitches Embroidering TRIAL SEWING CAUTION - Be aware of the needle at all times while sewing, and keep your hands away from all moving parts such as the needle, balance wheel and thread take-up lever, otherwise injury may result. - Do not pull or push the fabric too hard while sewing, otherwise injury may result. - Never use bent needles. Such needles can easily break, which could result in injury. 6 1 2 1 4 5 2 h ª⁄ O y[W Ł y[W Lfl Ø 3 1 1. When the machine is turned on, the straight stitch (left) is always selected. 2. Pass the thread underneath the presser foot and pull it out from the rear of the machine by about 5 cm. 1 Upper thread 2 5 cm (13/64") * Sewing can begin without pulling out the bobbin thread. * Use the J presser foot. 3. While pressing down on the thread and the fabric with your left hand, turn the balance wheel with your right hand to lower the needle to the sewing start position. 1 Thread Maintenance Troubleshooting Error Messages Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 25