Brother International PE-300S Users Manual - English - Page 34
Presser Foot - presser foot holder
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Contents Setting Up Basic Sewing Machine Operation Utility Stitches Embroidering Maintenance Troubleshooting PRESSER FOOT Changing the presser foot CAUTION Always make sure to turn the machine off and unplug it when changing presser feet. If the power accidentally comes on, the machine might start running and bodily injury could result. 1. Push the "NEEDLE POSITION" button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3. Press the black button located at the back of the presser foot holder to release the foot. 1 Presser foot holder 1 4. Place the presser foot pin directly below the holder-end and lower the presser foot lever to attach the presser foot. 1 Holder-end 2 Foot pin 1 2 31 Error Messages Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card)