Brother International PE-300S Users Manual - English - Page 61
Position foot so needle comes down over the left side of
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Contents Setting Up Basic Sewing Machine Operation Utility Stitches Embroidering 4. Close zipper. Turn fabric over to the right side and baste. 1 Left pressed edge of zip opening (wrong side) 2 Right pressed edge of the zip opening (wrong side) 3 Zipper 4 Basting stitch 1 5 Left pressed edge of zip opening (right side) 4 2 5 3 5 3 5. Position foot so needle comes down over the left side of the foot as illustrated in diagram. 1 Needle drop point 1 1 2 3 4 6. Sew a few stitches in reverse at the base of the opening to reinforce your stitching. Keep left edge of foot along the teeth of the zipper while sewing up the side of the zipper. When you are about 5cm from the top of the zipper, stop machine, drop needle down through fabric, remove basting, move the slide out of your way and finish sewing. 1 Basting stitch 2 0.7-1 cm 3 Reinforcement stitches 4 5 cm Maintenance Troubleshooting Error Messages Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 58