Brother International PE-300S Users Manual - English - Page 83
Correct thread tension, If upper thread tension is too, tight, loose, Fabric, Dial Setting
View all Brother International PE-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Contents Setting Up Basic Sewing Machine Operation Utility Stitches Embroidering THREAD TENSION Set thread tension according to the fabric you are using with the tension dial. @ @ 1 2 6 @5 @4 4 7 @6 @5 When doing machine embroidery, the tension dial should be set somewhere between 2-6. 3 1 Upper thread tension setting 2 Loose (Decrease thread tension) 3 Tight (Increase thread tension) 4 Upper thread tension dial * Use the following chart as a guide for tension dial settings. Fabric Dial Setting Heavyweight fabrics (denim, fleece, felt) 5 Medium and lightweight fabrics (broadcloth, jersey) (3~4) * If the stitches appear loose, turn the tension up one notch and resew. * When stitching one-point patterns on medium and lightweight fabrics, you can do better work if you reduce the tension by a half notch when sewing the outline. Turn the dial to the right to increase tension. @ 5 @4 @3 Turn the dial to the left to reduce tension. * If the tension dial is set extremely low, the machine may stop stitching during sewing. This is not a sign that anything's broken. It only indicates that your tension is set extremely low. Simply increase the tension slightly to continue sewing. Correct thread tension Surface of the fabric is about one-third of the total width. If upper thread tension is too If upper thread tension is too tight loose The lower thread will be visible on top. The upper thread will be loose Poor stitch tension can result in poor stitch conformation, puckered fabric and thread breakage. w Decrease the upper thread tension. w Increase the upper thread tension. Maintenance Troubleshooting Error Messages Sewing Chart Patterns (Programmed in Machine) Patterns (Memory Card) 80