Brother International SE-270D Users Manual - English - Page 101
causing it to bend or break.
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
CAUTION ● Be sure to securely tighten the screws with the screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break. ● Before starting to sew, slowly turn the balance wheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. ■ Using the optional quilting guide Use the quilting guide to sew parallel stitches that are equally spaced. Insert the stem of the quilter into the hole at a the rear of the walking foot or presser foot holder. Select a stitch. e • For details, refer to "Selecting stitching" (page Walking foot 45). 3 Place one hand on each side of the presser f foot, and then evenly guide the fabric while sewing. Presser foot holder Note z When sewing with the walking foot, sew at a speed between slow and medium. z When quilting, use a 90/14 home sewing machine needle. Adjust the stem of the quilter so that the quilt b guide aligns with the seam that has already been sewn. Appliqué, Patchwork and Quilt Stitching 95