Brother International SE-270D Users Manual - English - Page 45
Overcasting foot G - embroidery monogramming machine
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Place a different presser foot below the holder e so that the presser foot pin is aligned with the notch in the holder. Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read. 1 Note z When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the 1 wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. 2 3 a Presser foot holder b Notch c Pin Slowly lower the presser foot lever so that the f presser foot pin snaps into the notch in the presser foot holder. 1 a Presser foot lever X The presser foot is attached. Raise the presser foot lever to check that the g presser foot is securely attached. Buttonhole foot "A" Overcasting foot "G" Zigzag foot "J" Button fitting foot "M" Monogramming foot "N" Blind stitch foot "R" Side cutter "S" Embroidery foot "Q" z For details on the presser foot that should be used with the selected stitch, refer to "Stitch Settings" (page 64). Replacing the Presser Foot 39