Brother International SE-270D Users Manual - English - Page 122
it. The needle might break or cause injury.
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
EMBROIDERY Loosen the presser foot holder screw and e remove the presser foot holder. Turn the screwdriver toward the back. 2 13 a Screwdriver b Presser foot holder c Presser foot holder screw X Remove the presser foot holder. Set the bar on the embroidery foot onto the f needle clamp screw bar. CAUTION ● Do not hit the needle with your finger or the embroidery foot "Q" when attaching it. The needle might break or cause injury. ● Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle might hit the presser foot and break or bend. ● Before sewing, always turn the balance wheel toward you slowly, and check to be sure that the needle does not hit the presser foot. The needle could be broken or bent. 1 2 a Embroidery foot bar b Needle clamp screw Secure the embroidery foot with the presser g foot holder screw. Set the embroidery foot perpendicular. Tighten the presser foot holder screw. h Turn the screwdriver toward the front. 116