Brother International SE-270D Users Manual - English - Page 156
The lower thread, is tangled or, breaks., The thread tension, is incorrect., The fabric is, wrinkled
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
APPENDIX Symptom Probable Cause Remedy The bobbin thread is incorrectly installed. Correctly install the bobbin thread. The lower thread is tangled or breaks. The bobbin is scratched or does not rotate smoothly, or has a burr on it. The thread is tangled. Replace the bobbin. Remove the tangled thread and clean the shuttle. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. The upper thread was not threaded correctly. Correct the upper threading. The bobbin thread is incorrectly installed. Correctly install the bobbin thread. The thread tension is incorrect. The combination of fabric, thread and needle is not correct. The presser foot holder is incorrectly installed. Select a thread and needle that are appropriate for the type of fabric being sewn. Correctly install the presser foot holder. The thread tension is incorrect. Adjust the tension of the upper thread. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. The upper thread was not threaded correctly, or the bobbin is incorrectly installed. Correctly thread the upper thread and correctly install the bobbin thread. The spool is incorrectly installed. Correctly install the spool. The fabric is wrinkled. The combination of fabric, thread and needle is not correct. Select a thread and needle that are appropriate for the type of fabric being sewn. The needle is bent or blunt. Replace the needle. If thin fabrics are being sewn, the Shorten the stitch length or sew with stitch is too coarse. stabilizer material under the fabric. The thread tension is incorrect. Adjust the tension of the upper thread. Reference page 19 - page 146 page 16 page 21 page 19 page 34 page 40 page 52 page 16 page 19, page 21 page 21 page 34 page 35 page 55 page 52 150