Brother International SE-270D Users Manual - English - Page 136

EMBROIDERY Press when you want to change the color character by character in character embroidery. Since the sewing machine stops at the end of each character, the upper thread is changed as you sew. Selecting characters Specify the characters for embroidery. A maximum of 25 continuous characters from the same group can be combined. The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 20 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not sewn or when restarting the sewing machine after power has been turned off in the middle of the operation. Memo z When "The pattern is too large for the embroidery frame." is displayed, no more characters can be input. z Characters from different groups (sans serif and serif, etc.) cannot be combined. Select the type of characters. a Back one color Back one stitch Forward one color Forward one stitch • For details, refer to "Resewing" (page 141). The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed. Select the characters for embroidery. b If a character is pressed by mistake, press . † Example: Welcome Switch between uppercase/lowercase Switch among large/medium/small sizes • For details, refer to "Adjusting the layout" (page 138). Memo z When an LCD button has dashed lines around it (i.e.: ), that button cannot be selected. 130