Brother International SE-270D Users Manual - English - Page 82
If the needle catches too much of the hem
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
UTILITY STITCHES Adjust the stitch width until the needle slightly f catches the fold of the hem. R ■ If the needle does not catch the hem fold The needle is too far to the right. Press to increase the stitch width so that the needle slightly catches the fold of the hem. 1 a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. 1 a Stitch width ■ If the needle catches too much of the hem fold The needle is too far to the left. Press to decrease the stitch width so that the needle slightly catches the fold of the hem. 1 2 a Wrong side of fabric b Right side of fabric • For details, refer to "Adjusting the stitch width" (page 54). Sew with the fold of the hem against the g presser foot guide. Remove the basting stitching. h 1 2 a Wrong side of fabric b Right side of fabric 1 2 a Wrong side of fabric b Right side of fabric 76