Brother International SE-270D Users Manual - English - Page 46
Removing the presser foot, holder - embroidery sewing machine
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
GETTING READY Removing the presser foot holder Hold the presser foot holder in place with your b right hand, and then tighten the screw using the screwdriver in your left hand. Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the embroidery foot and quilting foot. Use the screwdriver to remove the presser foot holder. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 38). Use the screwdriver to loosen the presser foot b holder screw. 1 a Screwdriver Note z If the presser foot holder is not correctly installed, the thread tension will be incorrect. 2 13 a Screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lowera left side of the presser bar. 40