Brother International SE-270D Users Manual - English - Page 90
Zipper Insertion
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
UTILITY STITCHES Zipper Insertion A zipper can be sewn in place. Stitch Name Pattern Application Straight stitch (center 3 needle position) Attaching zippers Sewing concealed seams and pintucks Stitch Width [mm (inch.)] Auto Manual Stitch Length [mm (inch.)] Auto Manual Presser Foot - - 2.5 0.2-5.0 (3/32) (1/64-3/16) I There are many methods for inserting zippers. The procedures for inserting a centered zipper and a side zipper are described below. Inserting a centered zipper Using a basting stitch, continue sewing to the c edge of the fabric. Stitching is sewn on both pieces of fabric butted against each other. 2 1 3 a Right side of fabric b Stitching c End of zipper opening Attach zigzag foot "J". a Sew straight stitches up to the zipper opening. b With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. • For details, refer to "Basic stitching" (page 73). 1 3 2 4 a Basting stitching b Reverse stitches c Wrong side of fabric d End of zipper opening Press open the seam allowance from the d wrong side of the fabric. 1 a Wrong side of fabric 84