Brother International SE-270D Users Manual - English - Page 81
Blind Hem Stitching
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Blind Hem Stitching Secure the bottoms of skirts and pants with a blind hem. Two stitches are available for blind hem stitching. Stitch Name Pattern Application 17 Blind hem stitch 18 Blind hem stitching on mediumweight fabrics Blind hem stitching on stretch fabrics Stitch Width [mm (inch.)] Auto Manual 0.0 (0) 3← - 3→ 0.0 (0) 3← - 3→ Stitch Length [mm (inch.)] Auto Manual 2.0 1.0-3.5 (1/16) (1/16-1/8) 2.0 1.0-3.5 (1/16) (1/16-1/8) Presser Foot R Sew a blind hem according to the following procedure. Fold the fabric along the desired edge of the Attach blind hem foot "R". 3 a hem, and then baste it about 5 mm (3/16 inch) c from the edge of the fabric. R 4 2 1 3 a Wrong side of fabric b Basting stitching c Desired edge of hem d 5 mm (3/16 inch) Fold back the fabric along the basting, and b then position the fabric with the wrong side facing up. 2 • For details, refer to "Replacing the presser foot" (page 38). Select a stitch. d • For details, refer to "Selecting stitching" (page 45). Position the fabric with the edge of the folded e hem against the guide of the presser foot, and then lower the presser foot lever. 1 a Wrong side of fabric b Basting R 1 2 3 a Wrong side of fabric b Fold of hem c Guide Blind Hem Stitching 75