Brother International SE-270D Users Manual - English - Page 157
The stitch is
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Symptom Probable Cause Remedy Reference The upper thread was not threaded correctly. Correct the upper threading. page 21 Stitches are skipped. The combination of fabric, thread and needle is not correct. Select a thread and needle that are appropriate for the type of fabric being sewn. The needle is bent or blunt. Replace the needle. page 34 page 35 The needle is incorrectly installed. Correctly install the needle. page 35 Dust has accumulated under the Remove the needle plate cover and needle plate or in the shuttle. clean the shuttle. page 146 Dust has accumulated in the feed dogs or in the shuttle. Clean the shuttle. page 146 A high-pitched noise is made while sewing. The upper thread was not threaded correctly. The shuttle is scratched, or has a burr on it. Correct the upper threading. Replace the shuttle. Contact your retailer or the nearest authorized service center. page 21 - A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. page 16 The thread does not pass through the eye of the The needle has not been raised to the correct position. The thread cassette indicator is lit in red. Press the needle position button. The thread cassette indicator lights up in green. page 25 5 needle. The needle is incorrectly installed. Correctly install the needle. page 35 The presser foot that is used is not Attach the presser foot that is appropriate for the type of stitch appropriate for the type of stitch that that you wish to sew. you wish to sew. page 64 The stitch is not sewn correctly. The thread tension is incorrect. Adjust the tension of the upper thread. page 52 The thread is tangled, for example, in the shuttle. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. page 146 The feed dogs are lowered. Slide the drop feed lever to the left. page 96 The stitch is too fine. Lengthen the stitch length. page 55 The fabric does not feed. The presser foot that is used is not Attach the presser foot that is appropriate for the type of stitch appropriate for the type of stitch that that you wish to sew. you wish to sew. page 64 The thread is tangled, for example, in the shuttle. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. page 146 The sewing lamp does not come on. The sewing lamp is damaged. Contact your retailer or the nearest authorized service center. - Troubleshooting 151