Brother International SE-270D Users Manual - English - Page 87
buttonhole lever, and then start sewing.
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
■ Changing the stitch width Adjust the stitch width. ■ Sewing buttonholes on stretch fabrics When sewing buttonholes on stretch fabrics, use a gimp thread. Hook the gimp thread onto the part of a buttonhole foot "A" shown in the illustration. • For details, refer to "Adjusting the stitch width" (page 54). Memo z Before sewing buttonholes, check the stitch length and width by sewing a trial buttonhole on a scrap piece of fabric. It fits into the grooves, and then loosely tie it. 3 b Attach buttonhole foot "A". c • For details, refer to "Replacing the presser foot" (page 38). Select stitch 46 or 47 . d Adjust the stitch width to the thickness of the e gimp thread. Lower the presser foot lever and the f buttonhole lever, and then start sewing. When sewing is finished, gently pull the gimp g thread to remove any slack. Use a handsewing needle to pull the gimp h thread to the wrong side of the fabric, and then tie it. Buttonhole Stitching 81