Brother International SE-270D Users Manual - English - Page 103
Satin stitching
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Satin stitching Press e (Back key). A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. Connect the foot controller. a • For details, refer to "Starting to sew" (page 47). X The initial screen appears again. Select stitch 60 . f Attach zigzag foot "J". b J 3 • For details, refer to "Selecting stitching" (page 45). • For details, refer to "Replacing the presser foot" (page 38). Turn on the sewing machine, and then press c (Settings key) in the operation panel. While sewing, slide the sewing speed g controller to adjust the stitch width. Slide the controller to the left to make the width narrower. Slide the controller to the right to make the width wider. Narrower Wider X The settings screen appears. Press (Next page key) until "WIDTH d CONTROL" is on LCD screen, and the press ON for stitch width control setting. X The machine is now set so that the stitch width can be controlled with the sewing speed controller. • Adjust the sewing speed with the foot controller. When you are finished sewing, set the stitch h width control setting back to OFF. Memo z Although the stitching result differs depending on the type of fabric being sewn and the thickness of the thread being used, for best results, adjust the stitch length to between 0.3 and 0.5 mm (1/64 and 1/32 inch). Appliqué, Patchwork and Quilt Stitching 97