Brother International SE-270D Users Manual - English - Page 57
sewing machine is stopped, press
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Memo z The machine can be set so that the threads will be cut when sewing is finished. For details on setting the machine so that the threads are cut automatically, refer to "Automatically cutting the thread" (page 57). Pull the fabric to the left side of the machine, c and then pass the threads through the thread cutter to cut them. 1 ■ Using the thread cutter When sewing with thread thicker than #30, nylon or metallic threads, or other special threads, use 2 the thread cutter on the side of the machine to cut the threads. a Thread cutter When you wish to finish the stitching and the a sewing machine is stopped, press (Needle position button) once. 1 a Needle position button X The needle is raised. Raise the presser foot lever. b 1 a Presser foot lever Sewing 51