Brother International SE-270D Users Manual - English - Page 77
Sewing overcasting stitches using the optional side cutter
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Sewing overcasting stitches using the optional side cutter Using the optional side cutter, seam allowances can be finished while the edge of the fabric is cut off. Five stitches can be used to sew overcasting stitches with the side cutter. Stitch Name Pattern Application 63 Sewing straight stitches while cutting the fabric Stitch Width [mm (inch.)] Auto Manual 0.0 0.0-2.5 (0) (0-3/32) Stitch Length [mm (inch.)] Auto Manual Presser Foot 2.5 0.2-5.0 (3/32) (1/64-3/16) 64 Sewing zigzag stitches while cutting the fabric 3.5 3.5-5.0 1.4 0.0-4.0 (1/8) (1/8-3/16) (1/16) (0-3/16) Overcasting 65 stitch Preventing fraying in thin and mediumweight fabrics while cutting the fabric 3.5 3.5-5.0 2.0 1.0-4.0 (1/8) (1/8-3/16) (1/16) ( 1/16-3/16) S 3 66 Preventing fraying in thick 5.0 3.5-5.0 2.5 1.0-4.0 fabrics while cutting the fabric (3/16) (1/8-3/16) (3/32) ( 1/16-3/16) 67 Preventing fraying in thick 5.0 3.5-5.0 2.5 1.0-4.0 fabrics while cutting the fabric (3/16) (1/8-3/16) (3/32) ( 1/16-3/16) Position the side cutter so that side cutter pin c is aligned with the notch in the presser foot holder, and then slowly lower the presser foot lever. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 38). Hook the connecting fork of the side cutter b onto the needle clamp screw. 1 2 a Connecting fork b Needle clamp screw 2 1 a Notch in presser foot holder b Pin X The side cutter is attached. Raise the presser foot lever to check that the d side cutter is securely attached. CAUTION ● If the thread cassette is to be installed with the side cutter attached, be sure to lower the presser foot lever. If the presser foot lever remains raised, the needle threader will hit the presser foot, which may result in damages. Overcasting Stitches 71