Brother International SE-270D Users Manual - English - Page 53
Starting to sew
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Starting to sew Once you are ready to start sewing, you can start the sewing machine. The sewing speed can be adjusted using either the sewing speed controller or the foot controller. • If you continue to hold the start/stop button Note pressed immediately after the sewing starts, z When the foot controller is plugged in, the start/stop button cannnot be used to start or the machine will sew at a slow speed. 2 stop sewing. When the end of the stitching is reached, press c (Start/stop button) once. ■ Using the operation button Sewing can be started and stopped using the operation button (Start/stop button). Slide the sewing speed controller to the left or a right to select the desired sewing speed. Slide the sewing speed controller to the left to sew at a slower speed, or slide the speed controller to the right to sew at a faster speed. X The machine stops sewing with the needle down (in the fabric). When you have finished sewing, press d (Needle position button). X The needle is raised. Cut the threads. e • For details, refer to "Cutting the thread" (page 50). ■ Using the foot controller Sewing can be started and stopped using the foot controller. 1 a Sewing speed controller Press b (Start/stop button) once. Turn off the sewing machine. a When connecting the foot controller, be sure to turn off the sewing machine in order to prevent the machine from accidentally being started. 1 a Start/stop button X The machine starts sewing. Insert the foot controller plug into its jack on b the back side of the sewing machine. 1 a Foot controller jack Sewing 47