Brother International SE-270D Users Manual - English - Page 91
When using zipper foot I, be sure
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Align the seam with the center of the zipper, e and then baste the zipper in place. Select stitch 3 . h 2 1 3 a Wrong side of fabric b Basting stiching c Zipper Remove about 5 cm (2 inch) from the end of f the basting on the outside. 2 4 3 1 • For details, refer to "Selecting stitching" (page 45). CAUTION ● When using zipper foot "I", be sure to select the straight stitch (center needle position), and slowly turn the balance wheel toward you to check that the 3 needle does not touch the presser foot. If a different stitch is selected or the needle hits the presser foot, the needle may bend or break. a Wrong side of fabric b Zipper basting c Outside basting d 5 mm (2 inch) Attach the presser foot holder to the right pin g of zipper foot "I". 1 I Topstitch around the zipper. i 1 3 2 4 2 a Pin on the right side b Needle drop point • For details, refer to "Replacing the presser foot" (page 38). a Stitching b Right side of fabric c Basting stitching d End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. j Zipper Insertion 85