Brother International SE-270D Users Manual - English - Page 140
Embroidering
View all Brother International SE-270D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
EMBROIDERY Embroidering After the preparations are done, you can try embroidering. An example of the steps for an embroidery pattern will be given here. Embroidering a pattern Example: Embroidery thread number selected Embroidery patterns are embroidered with a change of thread after each color. Prepare embroidery thread of the color shown a on the LCD. 3 1 2 4 5 a Embroidery foot "Q" (recommended presser foot) b Current color step/Number of colors in design c Current name of color d Current color part e Next color part • Typical color names, embroidery thread/ country thread color number, needle count , and time to sew (after is pressed) can be displayed on the LCD. When switching the display, press (Settings key) to change it. Refer to "LCD (liquid crystal display) operation" (page 129). Set the embroidery thread in the thread b cassette, and thread the needle. • Refer to "Loading the spool into the thread cassette" (page 22) and "Threading the needle" (page 25). Pass the thread through the embroidery foot c hole, and hold it gently in your left hand. Give the thread a little slack. CAUTION ● If the thread is pulled too tight, the needle may break or bend. ● Do not let hands or objects hit the carriage while sewing. The pattern may misalign. 134