Brother International SE-270D Users Manual - English - Page 145

Horizontal mirror image key Mirrors the embroidery left and right. When it is , it cannot be used. Stitch beginning key Switches the position for beginning stitching between center/lower left of the design. Trial key Moves the embroidery unit carriage, and checks the embroidery range. Storing characters The characters you entered can be stored in the sewing machine memory. Since the stored characters will not be erased when the power is turned off, you can always recall them for embroidery. This is convenient for storing names and the like. You can store up to five groups. ■ Storing characters After inputting the characters to be stored, a press (Memory key). CAUTION ● Never lower the needle when the embroidery frame is moving. The needle could be broken or bent. ● If the movement for the stitching position exceeds the range where embroidery can be done, you can not use that size embroidery frame. Check the display for a frame that can be used and use it. If a frame other than the ones displayed is used, it could result in injury. Press (Back key) to return to the original d screen. X The screen for selecting the storage location (pocket) is displayed. Select the pocket for storage from pockets 1 - 5. 4 b indicates an empty pocket. indicates a pocket where a character is already stored. X The selected pocket is shown in reverse highlighting. Press . c Memo z When the power is turned off, the layout returns to the original setting. X "Saving..." appears while the character is being stored in the pocket. • Do not turn off the sewing machine while a character is being stored, otherwise the character data may be lost. Memo z If new characters or blanks are saved to a pocket where characters are already stored, the previously stored characters are erased. Convenient Functions 139