Cisco 6941 Administration Guide - Page 123
Status > Network Statistics., Clear, Table 7-3, Network Statistics Message Information for
UPC - 882658277801
View all Cisco 6941 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Chapter Status Menu Step 4 Select Status > Network Statistics. To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey. To exit the Network Statistics screen, press the Back softkey. Table 7-3 Network Statistics Message Information for the Cisco Unified IP Phone 6900 Series Item Description Tx Frames Number of packets sent by the phone Tx Broadcasts Number of broadcast packets sent by the phone Tx Unicast Total number of unicast packets transmitted by the phone Rx Frames Number of packets received by the phone Rx Broadcasts Number of broadcast packets received by the phone Rx Unicast Total number of unicast packets received by the phone Neighbor Device ID: • Neighbor IP Address Identifier of a device connected to this port discovered by CDP protocol. • Neighbor Port Restart Cause-One of these values: Cause of the last reset of the phone • Hardware Reset (Power-on reset) • Software Reset (memory controller also reset) • Software Reset (memory controller not reset) • Watchdog Reset • Unknown Port 1 Link state and connection of the PC port (for example, Auto 100 Mb Full-Duplex means that the PC port is in a link-up state and has auto-negotiated a full-duplex, 100-Mbps connection) Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) OL-23769-01 7-7