Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 212

neighbor AAA no shutdown neighbor 10.155.15.2 remote-as 32 neighbor 10.155.15.2 shutdown Dell(conf-router_bgp)#neigh 10.155.15.2 filter-list 1 in Dell(conf-router_bgp)#ex Dell(conf)#ip as-path access-list Eagle Dell(config-as-path)#deny 32$ Dell(config-as-path)#ex Dell(conf)#router bgp 99 Dell(conf-router_bgp)#neighbor AAA filter-list Eagle in Dell(conf-router_bgp)#show conf ! router bgp 99 neighbor AAA peer-group neighbor AAA filter-list Eaglein neighbor AAA no shutdown neighbor 10.155.15.2 remote-as 32 neighbor 10.155.15.2 filter-list 1 in neighbor 10.155.15.2 shutdown Dell(conf-router_bgp)#ex Dell(conf)#ex Dell#show ip as-path-access-lists ip as-path access-list Eagle deny 32$ Dell# Redistributing Routes In addition to filtering routes, you can add routes from other routing instances or protocols to the BGP process. With the redistribute command, you can include ISIS, OSPF, static, or directly connected routes in the BGP process. To add routes from other routing instances or protocols, use any of the following commands in ROUTER BGP mode. • Include, directly connected or user-configured (static) routes in BGP. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode redistribute {connected | static} [route-map map-name] Configure the map-name parameter to specify the name of a configured route map. • Include specific ISIS routes in BGP. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode redistribute isis [level-1 | level-1-2 | level-2] [metric value] [route-map map-name] Configure the following parameters: - level-1, level-1-2, or level-2: Assign all redistributed routes to a level. The default is level-2. - metric value: The value is from 0 to 16777215. The default is 0. - map-name: name of a configured route map. • Include specific OSPF routes in IS-IS. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode 212 Border Gateway Protocol IPv4 (BGPv4)