Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 688

(Optional) E-Series only: For an IPv4 route, you can enter a VRF name to specify the virtual routing table to which the tracked route belongs. 2. (Optional) Configure the time delay used before communicating a change in the status of a tracked route. OBJECT TRACKING mode delay {[up seconds] [down seconds]} Valid delay times are from 0 to 180 seconds. The default is 0. 3. (Optional) Identify the tracked object with a text description. OBJECT TRACKING mode description text The text string can be up to 80 characters. 4. (Optional) Display the tracking configuration and the tracked object's status. EXEC Privilege mode show track object-id Examples of IPv4 and IPv6 Tracking Route Reachability The following example configures object tracking on the reachability of an IPv4 route. Dell(conf)#track 104 ip route 10.0.0.0/8 reachability Dell(conf-track-104)#delay up 20 down 10 Dell(conf-track-104)#end Dell#show track 104 Track 104 IP route 10.0.0.0/8 reachability Reachability is Down (route not in route table) 2 changes, last change 00:02:49 Tracked by: Dell#configure Dell(conf)#track 4 ip route 3.1.1.0/24 reachability vrf vrf1 The following example configures object tracking on the reachability of an IPv6 route. Dell(conf)#track 105 ipv6 route 1234::/64 reachability Dell(conf-track-105)#delay down 5 Dell(conf-track-105)#description Headquarters Dell(conf-track-105)#end Dell#show track 105 Track 105 IPv6 route 1234::/64 reachability Description: Headquarters Reachability is Down (route not in route table) 2 changes, last change 00:03:03 688 Object Tracking