Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 978

MIB Object copyUserName copyUserPassword OID Object Values Description . 1.3.6.1.4.1.6027.3.5.1.1.1. 1.9 Username for the server. Username for the FTP, TFTP, or SCP server. • If you specify copyUserName, you must also specify copyUserPassword. . Password for the server. Password for the FTP, 1.3.6.1.4.1.6027.3.5.1.1.1. TFTP, or SCP server. 1.10 Copying a Configuration File To copy a configuration file, use the following commands. NOTE: In UNIX, enter the snmpset command for help using the following commands. Place the f10-copy-config.mib file in the directory from which you are executing the snmpset command or in the snmpset tool path. 1. Create an SNMP community string with read/write privileges. CONFIGURATION mode snmp-server community community-name rw 2. Copy the f10-copy-config.mib MIB from the Dell iSupport web page to the server to which you are copying the configuration file. 3. On the server, use the snmpset command as shown in the following example. snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-address mib-object.index {i | a | s} object-value... • Every specified object must have an object value and must precede with the keyword i. Refer to the previous table. • index must be unique to all previously executed snmpset commands. If an index value has been used previously, a message like the following appears. In this case, increment the index value and enter the command again. Error in packet. Reason: notWritable (that object does not support modification) Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101 • To complete the command, use as many MIB objects in the command as required by the MIB object descriptions shown in the previous table. NOTE: You can use the entire OID rather than the object name. Use the form: OID.index i object-value. To view more information, use the following options in the snmpset command. • -c: View the community, either public or private. • -m: View the MIB files for the SNMP command. • -r: Number of retries using the option • -t: View the timeout. • -v: View the SNMP version (either 1, 2, 2d, or 3). 978 Simple Network Management Protocol (SNMP)