Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 36

1 About this Guide This Configuration guide provides information about how to use and configure the software features supported in the Dell Networking operating system (OS) on a C9010 switch and C1048P port extender. You can configure each feature by entering commands from the C9010 console. Though this guide contains information on protocols, it is not intended to be a complete reference. This guide is a reference for configuring protocols on Dell Networking systems. For complete information about protocols, refer to related documentation, including IETF requests for comments (RFCs). The instructions in this guide cite relevant RFCs. The Standards Compliance chapter contains a complete list of the supported RFCs and management information base files (MIBs). Audience This document is intended for system administrators who are responsible for configuring and maintaining networks and assumes knowledge in Layer 2 and Layer 3 networking technologies. Conventions This guide uses the following conventions to describe command syntax. Keyword parameter Keywords are in Courier (a monospaced font) and must be entered in the CLI as listed. Parameters are in italics and require a number or word to be entered in the CLI. {X} Keywords and parameters within braces must be entered in the CLI. [X] Keywords and parameters within brackets are optional. x|y Keywords and parameters separated by a bar require you to choose one option. x||y Keywords and parameters separated by a double bar allows you to choose any or all of the options. Related Documents For more information about the Dell Networking C9000 Series, refer to the following documents: • Dell Networking C9010 Getting Started Guide • Dell Networking C9010 Installation Guide • Dell Networking C1048P Getting Started Guide • Dell Networking C1048P Installation Guide • Dell Networking C9000 Series Command Line Reference Guide • Dell Networking C9000 Series Release Notes 36 About this Guide