Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 349

udfLinkStatusTest FAIL Starting test: usbTest ...... -USB "/dev/rsd0d" is not plugged/mounted/formatted; test SKIPPED usbTest FAIL LEVEL 2 DIAGNOSTIC ipcPingTrafficTest FAIL --------- Group Test Statistics --------- Cpu Name : CP00 Total : 48 Passed : 31 Failed : 17 Aborted : 0 Elapsed time : 00H:03M:53S Stop reason : after completion ------ Failed tests (level, times) ------ cpuGELinkStatusTest (0, 1) i2cTest (0, 1) psuCurrentTest (0, 1) psuFanAirFlowDirectionTest (0, 1) psuFanSpeedTest (0, 1) psuFanStatusTest (0, 1) psuPresenceTest (0, 1) psuShowTempTest (0, 1) psuStatusTest (0, 1) psuVoltageTest (0, 1) usbTest (0, 1) fanCntrlSpeedTest (1, 1) i2cTest (1, 1) psuEepromAccessTest (1, 1) udfLinkStatusTest (1, 1) usbTest (1, 1) ipcPingTrafficTest (2, 1) TRACE Logs In addition to the syslog buffer, to report hardware and software events and status information, the system buffers trace messages which are continuously written by various software tasks. Each TRACE message provides the date, time, and name of the system process. All messages are stored in a ring buffer that you can save to a file either manually or automatically after failover. Auto Save on Reload, Crash, or Rollover Exception information for the switch is stored in the flash:/TRACE_LOG_DIR directory. This directory contains files that save trace information when there has been a task crash or timeout and trace information from the Route Processor and Control Processor CPUs. You can access the TRACE_LOG_DIR files by FTP or by using the show file command from the flash:// TRACE_LOG_DIR directory. Uploading Trace Logs To upload a trace-log file from a switch CPU, use the upload trace-log command. When the upload trace log command is issued, the trace log information is uploaded to flash:/ TRACE_LOG_DIR. Debugging and Diagnostics 349