Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 825

• Disable inline power on the port extender. EXEC privilege mode power inline suspend pe pe-id stack-unit unit-number - pe pe-id - Specify the port extender ID. The range is from 0 to 255. - stack-unit unit-number - Specify the stack unit number of the port extender. The range is from 0 to 7. Example of Suspending Power Delivery on the Port Extender Dell#power inline suspend pe 0 stack-unit 0 Example of Displaying Suspended Power Delivery on the Port Extender Dell#power inline suspend pe 0 stack-unit 0 Dell# Dell#show power inline pe 0 stack-unit 0 % Error: Power to StackUnit 0 of PE 0 is in suspended state. Restoring Power Delivery on the Port Extender You can temporarily disable and then restore power on the port extender. For information about how to disable power delivery, see Suspending Power Delivery on the Port Extender. To restore inline power on the port extender, use the following command. When you restore the inline power to the port extender, the control bridge (CB) pushes the port extender PoE configurations again to the port extender. • Restore inline power on the port extender. EXEC privilege mode power inline restore pe pe-id stack-unit unit-number - pe pe-id - Specify the port extender ID. The range is from 0 to 255. - stack-unit unit-number - Specify the stack unit number of the port extender. The range is from 0 to 7. Example of Restoring Power Delivery on the Port Extender The following example disable power delivery on the port extender. Dell#power inline restore pe 0 stack-unit 0 Example of Displaying Restored Power Delivery on the Port Extender Dell#show power inline pe 0 stack-unit 0 Global inline power Threshold: 99 Power Reserved for inline Power:841W Total Inline Power Consumed: 0W Remaining inline power Available:841W Power Management Mode: Static Interface Inline Power Inline Power Class Device PoE Port LLDP Max / Alloc Consumed Type Priority Support Power over Ethernet (PoE) 825