Epson 2070 Service Manual - Page 106
Removing the E-ring, Removing 1 Gear 29 mm
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Disassembly and Assembly 3.3.2 Disassembling Paper Support Block Assembly 1. Remove the CSF gear cover. Refer to step 1 in Section 3.3.1. 2. Remove the stepping motor. Refer to steps 2 and 3 in the Section 3.3.1. 3. Remove the E-ring fixing the right edge of the paper feed shaft. LQ-2070 Service Manual Figure 3-41 Removing the E-ring 4. Remove 1 gear (29 mm) from the right edge of the paper feed shaft. Paper Feed Shaft Gear(29 mm) Figure 3-42 Removing 1 Gear (29 mm) 5. Remove the paper feed shaft by pulling it toward the right side. 6. Remove the CPB tight (3 × 8) screw securing the paper support shaft to the right CSF frame, as shown in the following figure. Paper Support Shaft CPB tight Screw (3X8) Figure 3-43 Removing the CBP Tight (3 X 8) Screw 3-28 Rev.A