Epson 2070 Service Manual - Page 34
Paper Handling Sequence, In this, Rev.A
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
LQ-2070 Service Manual Product Description 1.3.3 Paper Handling Sequence In this section, paper handling firmware sequences are described in several cases. q Printer status Printer is on line (not in the pause state). No PE sensor detects that paper is loaded. The release lever position is set to continuous paper. Table 1-34 Paper Handling Sequence 1 Occurrence Print command sent Pause button pressed LF/FF button pressed Load/Eject button pressed I Micro Adjust ~button pressed Micro Adjust ~ button pressed Release lever set to Friction Result Continuous paper is loaded. Printer enters pause state. Continuous paper is loaded. I Continuous paper is loaded. i I No operation. I No operation. The paper path is changed for cut sheets. q Printer status The rear PE sensor detects that paper is loaded in the rear paper path. The release lever is set to continuous paper. Table 1-35 Paper Handling Sequence 2 Occurrence Result Pause button pressed The printer goes off or on line. LF/FF button pressed The printer performs a line feed. LF/FF button held down continuously The printer performs a form feed after the line feed. Load / Eject button pressed Paper is ejected to the rear paper park position. Load /Eject button pressed and paper advanced to skiR area Paper is advanced to the nexl TOF position. Micro Adjust ~ button pressed The printer micro feeds paper forward. Micro Adjust ~ button pressed The printer micro feeds paper backward, Release lever set to Friction The beeper sounds. Front paper end sensor detects that paper is The beeper sounds. loaded in the front paper path. Rev.A 1-25