Epson 2070 Service Manual - Page 40
Micro Adjust Function, 4.4 Tear Off Function
UPC - 010343812277
View all Epson 2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
LQ-2070 Service Manual Product Description 1.4.3 Micro Adjust Function The micro adjust function lets you set the TOF and tear off positions. After the printer is put in this mode, you can adjust the top of form (TOF) position up or down in increments of %16 inch by pressing the LF/FF or Load/Eject button. The adjusted TOF position is saved to *e EEPROM. If the printer is turned off, the setting is not cleared. The function is operational in the printer under the following conditions and within the following area: q Conditions required for the adjustment The TOF position can be adjusted under the following conditions: 1. The data buffer is empty and the printer is on line. 2. Paper is at the TOF position. 3. The Pause button is held down more than 3 seconds to put the printer in micro adjust mode. . Adjustable area Micro adjust positions can be set within the following range from the top edge of the page: 4.2rnm- 8.5 mm ,8.5 mm + 1 inch (0.16" - 0.33", 0.33" + 24.5") 1.4.4 Tear Off Function The tear off function advances continuous paper to the tear off position when the Tear Off/ Bin button is pressed. There are two modes for this function: auto tear off and manual tear off. The teax off mode can be selected in the default setting mode. After the paper is tom off at the perforation, it is fed back to the TOF position when any new print data is sent to the printer. The tear off position is saved in the EEPROM, and if the printer is turned off, the setting is not cleared. q Conditions required for the adjustment % Auto tear off function 0 Auto tear off has been set to ON in default setting mode. 0 The release lever has been set to Tractor. 0 The data buffer is empty, and the printer is on line. 0 More than 3 seconds have passed after tAe host computer finished transferring print data. % Manual tear off function 0 Auto tear off has been set to OFF in default setting mode. 0 The release lever has been set to Tractor. 0 The data buffer is empty and the printer is on line, or the printer is off line. 0 The Tear Off button was pressed under all the conditions listed above. . Paper handling with the tear off position 0 Pressing the Pause button with the printer offline feeds the paperback to the TOF position for the next page and brings the printer back on line. 0 Pressing the Pause button with the printer on line feeds the paperback to the TOF position for the next page and takes the printer off line. 0 Pressing the LF /FF button feeds the paperback to the TOFposition for the next page and executes a line feed. 0 Pressing the Load /Eject button fee& the paperback to the TOF position for the next page and ejects paper backward. 0 Pressing the Pause button more than 3 seconds puts the printer in micro adjust mode, where you can adjust the tear off posit-ion by pressing the I-F /FF or Load/Eject button. 0 If the printer is turned off while in the tear off mode, the tear off position is saved, and paper is fed back to the TOF position for the next page by turning on the printer, again. Rev.A 1-31