Epson LX-80 User Manual - Page 137
APPENDIX G-PRINTER MAINTENANCE, Always, Now and Then, Rarely
View all Epson LX-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Appendix G Printer Maintenance Always Always keep your printer in a safe and clean location. Keep it away from : Dust and grease Heaters and furnaces. Safe temperature range is 41°F (5°C) to 95°F (35°C) Now and Then Clean particles and dust from the printer every so often with a soft cloth or brush. Use a mild cleanser for the outside framework and, after removing the ribbon cassette, denatured alcohol for the inside. See your Epson dealer for replacement ribbon cassettes. Rarely Once in a great while your printer should be lubricated. Epson recommends two lubricants: O-2 (Epson Part No. B710200001) and G-2 (Epson Part No. B70020001). Every 6 months or one million lines, use O-2 lubricant on the shafts and platen bearings, wiping off excess with cloth. Use G-2 sparingly on ribbon feed, line feed, and carriage return drive gears every five million lines. Note: Using too much lubricant can cause problems with your printer. Apply the lubricant sparingly. G-1