Epson Stylus Pro 7600 - UltraChrome Ink User Manual - Page 22
least two people to hold, printer on a desk, use
View all Epson Stylus Pro 7600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 | Setting Up the Printer 5. Take out the foam supports from under the printer. 6. Remove any packing tape. Check these areas: • the front cover • the ink compartment cover (in front on the left) • the maintenance tank (on the right side near the bottom) 7. Open the front cover. Then unscrew the bolt and remove the bracket securing the print head. Save the bolt and bracket in case you need to ship the printer. Warning Two or more people are required to lift the printer. 8. If you want to set the printer on a desk, use at least two people to hold it as shown. Otherwise follow the instructions in the next section to mount it on the optional stand. 1-22
1-22
22
|
Setting Up the Printer
5.
Take out the foam supports from under the printer.
6.
Remove any packing tape. Check these areas:
•
the front cover
•
the ink compartment cover (in front on the left)
•
the maintenance tank (on the right side near the bottom)
7.
Open the front cover. Then unscrew the bolt and remove the bracket
securing the print head. Save the bolt and bracket in case you need to
ship the printer.
8.
If you want to set the
printer on a desk, use at
least two people to hold
it as shown. Otherwise
follow the instructions in
the next section to mount
it on the optional stand.
Warning
Two or more people are
required to lift the printer.