HP 3390 Service Manual - Page 38

Media specifications Supported media weights and sizes NOTE See the user guide for information about using media correctly. For optimum results, use conventional 80 to 90 g/m2 (20 to 24 lb) photocopy paper. Verify that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls, and bent edges. NOTE The all-in-one supports a wide range of standard and custom size print media. The capacity of trays and bins can vary depending on media weight and thickness and on environmental conditions. use only transparencies that are designed for use with HP LaserJet printers. Inkjet and monochrome transparencies are not supported for this all-in-one. Table 1-5 Priority input slot (tray 1) media specifications Media Dimensions1 Weight Capacity Paper Minimum 76 x 127 mm (3 x 5 60 to 177 gm2 (16 to 47 lb) inches) 1 sheet HP cover paper2 Transparencies and opaque film Maximum 218 x 356 mm (8.5 x 14 inches) Same as the preceding listed minimum and maximum sizes. 203 g/m2 (75 lb cover) Thickness: 0.10 to 0.13 mm (3.9 to 5.1 mils) 1 sheet 1 sheet Labels3 Thickness: up to 0.23 mm (9 mils) 1 sheet Envelopes Up to 90 gm2 (16 to 24 lb) 1 sheet 1 The all-in-one supports a wide range of standard and custom sizes of media. Check the printer driver for supported sizes. 2 Hewlett-Packard does not guarantee results when printing with other types of heavy paper. 3 Smoothness: 100 to 250 (Sheffield). Table 1-6 Tray 2 and optional tray 3 Media Minimum-size Maximum-size Letter A4 Dimensions1 148 x 147.3 mm (4.1 x 5.8 inches) 216 x 356 mm (8.5 x 14 inches) 216 x 279 mm (8.5 x 11 inches) 210 x 297 mm (8.3 x 11.7 inches) Weight 60 to 105 gm2 (16 to 28 lb) Capacity2 250 sheets of 80 gm2 or 20 lb paper 16 Chapter 1 All-in-one information ENWW