HP F4280 User Guide - Page 13
Black, Color, Start Copy Black, Start Copy Color, Resume, Cancel, Label, Name and Description, CAUTION
UPC - 883585581313
View all HP F4280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Label 1 Icon 2 3 4 5 6 Name and Description Check Print Cartridge lights: Indicates the need to reinsert the specified print cartridge, replace the print cartridge, or close the print cartridge door. The Black light indicates that the problem is with the black print cartridge, and the Color light indicates that the problem is with the tri-color print cartridge. Start Copy Black: Starts a black-and-white copy job. NOTE: To make copies, you must connect your product to a computer. The computer must be on and the software installed. Start Copy Color: Starts a color copy job. NOTE: To make copies, you must connect your product to a computer. The computer must be on and the software installed. Resume: Instructs the HP All-in-One to continue after a problem is solved. A blinking Resume light next to the Resume button indicates the need to load paper or clear a paper jam. Cancel: Stops a print, copy, or scan job. On: Turns the HP All-in-One on or off. The On button is lit when the HP Allin-One is powered on. The light blinks while performing a job. When the HP All-in-One is off, a minimal amount of power is still used by the product. To completely disconnect the power supply to the HP All-in-One, turn the product off, and then unplug the power cord. CAUTION: Before you unplug the power cord, you must press the On button and allow the HP All-in-One to turn itself off. This prevents the print cartridges from drying out. HP All-in-One overview Control panel buttons 11