HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 121

Removing and Replacing Components Removing and Replacing the Blower Side Bezels The right and left blower side bezels are removed using the same procedure. Figure 3-22 Blower Side Bezel Detail Step 1. Remove the front and rear blower bezels. Step 2. Remove the side blower bezel brackets from front and rear to release the side blower bezel. Step 3. Lift the bezel up and off the blower housing frame. Replacing the Blower Side Bezel The right and left blower side bezels are installed using the same procedure Step 1. Place the side bezel slightly above the blower housing frame. Step 2. Align the lower bezel tabs to the slots in the side panels. Step 3. Lower the bezel so the bezel top lip fits securely on the blower housing frame and the two lower tabs are fully inserted into the side panel slots. Step 4. Attach the side Blower bezel brackets to the front and rear to secure the bezel in place. Step 5. Install the front and rear blower bezels. The front bezel is curved. Chapter 3 109