HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 38
Unpacking and Inspecting Hardware Components, Inspection Precautions, Claims Procedures
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the System Unpacking and Inspecting NOTE If the tilt indicator shows that an abnormal shipping condition has occurred, write "possible hidden damage" on the bill of lading, and keep the packaging. Inspection Precautions • When the shipment arrives, check each container against the carrier's bill of lading. Inspect the exterior of each container immediately for mishandling or damage during transit. If any of the containers are damaged, request the carrier's agent be present when the container is opened. • When unpacking the container(s), inspect each item for external damage. Look for broken controls and connectors, dented corners, scratches, bent panels, and loose components. NOTE Hewlett-Packard recommends keeping the shipping container or the packaging material. If it becomes necessary to repackage the cabinet, the original packing material will be needed. If discarding the shipping container or packaging material, please dispose of them in an environmentally responsible manner (recycle, if possible). Claims Procedures If the shipment is incomplete, the equipment is damaged, or it fails to meet specifications, notify the nearest Hewlett-Packard Sales and Service Office. If damage occurred in transit, notify the carrier as well. Hewlett-Packard will arrange for replacement or repair without waiting for settlement of claims against the carrier. In the event of damage in transit, retain the packing container and packaging materials for inspection. Unpacking and Inspecting Hardware Components Tools Required The following tools are required to install the system: • Standard hand tools (such as a adjustable-end wrench) • ESD grounding strap • Digital Ohm-Voltmeter (or VOM) capable of reading AC/DC voltages • 1/2-inch wrench/socket • 9/16-inch wrench • #2 Phillips screwdriver • Flathead screwdriver • Wire cutters or utility knife • Safety goggles or glasses • T10, T15, T20, T25, and T30 Torx drivers • 9-pin to 25-pin serial cable (Hewlett-Packard Part Number 24542G) • 9-pin to 9-pin Null modem cable (Hewlett-Packard Part Number F1047-80002) 26 Chapter 2