HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 98

Removing and Replacing Components Removing and Replacing the Rear Electromagnetic Interference (EMI) Cover Removing and Replacing the Rear Electromagnetic Interference (EMI) Cover There is an EMI (Electromagnetic Interference) cover on the rear of the cabinet. This cover is secured with one captive screw in the lower center of the cover. The screw can be seen through the hole in the lower center of the cover. Care should be taken so as not to damage the EMI gasket on the cover. This cover is easily removed. Figure 3-3 Rear EMI Cover Location EMI Cover Removing the Rear EMI Cover Step 1. Open the rear cabinet door. Step 2. Loosen the single slotted T-25 captive screw in the lower center of the EMI cover. Step 3. Using the handle on the EMI panel, tilt the cover away from the chassis at the captive screw edge. Step 4. Remove the cover from the chassis. 86 Chapter 3