HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 64
Removing the EMI Panels, Removing Front EMI Panel Screw
View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installing the System Setting Up the hp Integrity Superdome or hp 9000 Superdome Removing the EMI Panels Remove the front and back electromagnetic interference (EMI) panels to access ports and to visually check whether components are in place and the LEDs are properly illuminated when power is applied to the system. To remove the front and back EMI panels: Step 1. Using a T20 Torx driver, loosen the captive screw at the top center of the front EMI panel. Figure 2-30Removing Front EMI Panel Screw Front EMI Panel Screw Step 2. Use the handle provided to remove the EMI panel and set it aside. When in position, the EMI panels (front and back) are tightly in place. Removing them takes controlled, but firm, exertion. Step 3. Loosen the captive screw at the lower center of the back EMI panel. 52 Chapter 2