HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 77

Figure 2-42MP Virtual Front Panel Installing the System Booting and Verifying the System Step 6. From the VFP menu, enter s to select the whole system or the partition number to select a particular partition. An output similar to that shown in Figure 2-43 should appear. In this example, no status should be listed, because the system 48 volts has not been switched on. Figure 2-43Example of Partition State-Cabinet Not Powered Up Step 7. For each of the remaining windows, bring up the partition console for each partition by enter co at the MP prompt, as shown in Figure 2-44. These windows should be blank. If not, the information in them means nothing at this point, because the cabinet is powered off. Chapter 2 65