HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 275

Management Processor Commands MP Command: PD MP Command: PD PD - Set Default Partition • Access level-Operator • Scope-Complex This command sets the default partition. If a default partition already exists, then this command overrides the previously defined partition. Setting the default partition prevents the user from being forced to enter a partition in commands that require a partition for their operation. For example, this prevents a user from accidentally TOCing the wrong partition. A default partition is automatically set for users who are assigned the Single Partition User access level when they login into the MP handler. A user assigned the Single Partition User access level can not change the default partition. When users of the Administrator or Operator levels log in, their default partition will be set to an invalid partition. The default partition for users of these access levels is maintained independently for each connection. When the user logs out of the MP handler, the default partition setting is not stored in non-volatile storage. Example F-18 PD Command See also: RE, SO Appendix F 263