HP Integrity Superdome SX1000 User Guide, Sixth Edition - HP Integrity Superdo - Page 308

JUST Exploration Tool Data Files Example File The following is an example of the Complex Configuration File: complex name architecture code Complex zurg- s0x20 entity type entity reference number Entity MP0 host name protocol address port Hostname zurg -s UDP 15.99.83.130 5151 queue depth queue size SDP version Firmware 165536 1.0 End_Entity entity type entity reference number Entity NODE 0 entity type entity reference number Target_Entity MP 0 queue depthqueue size SDP version Firmware 16553 6 1.0 End_Entity End_Complex End_Of_File Node Configuration Files Each node detected by JET gets a node configuration file. These files are named node_.cfg and are placed in the default scan directory /opt/scansw/data/cplx_. Where hostname is the name of the complex under test. Theses files define the boards and paths present in each node. This file is created by the Configuration Management Deamon (cmd). An entry like the following must be supplied for each board in the node: Board _ An entry like the following must be supplied for each path in the node: Path Each device on the path must have an entry like the following: Device 296 Appendix G