HP Pavilion xt500 HP Pavilion ze5100 Series and HP Omnibook xe4400 Series Note - Page 68
Connecting to a LAN
View all HP Pavilion xt500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Modem and Network Connections Connecting to a LAN Connecting to a LAN You can connect to local area networks (LANs), which give you access to network resources, such as printers and file servers on your corporate network, and possibly to the Internet. To connect to a LAN 1. Check that the existing LAN supports Ethernet 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) connections. 2. Plug the LAN cable (not supplied) into the built-in LAN port. The cable must have an RJ-45 connector. 3. Windows automatically detects and sets up a LAN connection. To edit settings, open Network and Dial-up Connections in Control Panel. See Windows Help for information about setting up and using LAN connections-click Start, Help and Support (or Help). Contact your network administrator for network information. Two lights next to the LAN port indicate the status of the connection: • The yellow light indicates network activity. • The green light indicates a 100 MB per second link. 68 Reference Guide