HP Scitex LX600 HP Designjet L65500 Printer and HP Scitex LX Printer Family - - Page 44
Ink Supply Legend, CAUTION, on the front panel to close the electrovalves.
View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Ink Supply Legend ● 1=K ● 2=Y ● 3=C ● 4=M ● 5 = LM ● 6 = LC CAUTION: Do not push the ink from the syringe if the electrovalves are not open. You will notice too much resistance if the electrovalves are not open. TIP: If you run out of ink in the syringe, you can refill the syringe from the ink cartridge. Keep track of how much ink you remove from the ink cartridge, because you will be asked to report the quantity of ink taken. Make sure the electrovalves are still open. 15. Remove the syringe from the purge port with a cloth around the needle to prevent spills. 16. Press OK on the front panel to close the electrovalves. 17. Check that the ink has arrived as far as the purging bag and purger. 18. Press OK to confirm that you have finished purging the ink tubes for the color selected. 19. Disconnect the purge bag and connect the ink cartridge. If the ink cartridge is connected correctly, the cartridge LED will show a constant green light. 40 Chapter 7 Purge the ink system ENWW