HP Scitex LX600 HP Designjet L65500 Printer and HP Scitex LX Printer Family - - Page 56
Install the aerosol filters
View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Install the aerosol filters 1. Open the printhead access door in the side of the printer, and lift the carriage cover. 2. The aerosol filter containers are on the near and the far sides of the printheads. 3. Lift up the right-hand side of the filter container; it pivots on the left. 4. Pull the old filter out of the bottom of its container and dispose of it according to the instructions provided with the new filter. 5. Unpack the new filters and ensure that the blue tabs at each end of each filter are at right angles to the filter. 6. Insert the new filter into the container. 52 Chapter 8 Prepare the printer ENWW
Install the aerosol filters
1.
Open the printhead access door in the side of the printer, and lift the carriage cover.
2.
The aerosol filter containers are on the near and the far sides of the printheads.
3.
Lift up the right-hand side of the filter container; it pivots on the left.
4.
Pull the old filter out of the bottom of its container and dispose of it according to the instructions
provided with the new filter.
5.
Unpack the new filters and ensure that the blue tabs at each end of each filter are at right angles
to the filter.
6.
Insert the new filter into the container.
52
Chapter 8
Prepare the printer
ENWW